This design is a good example of the box pleating technique and is a fantastic model to fold, resulting in a stunning outcome. A complex design which requires glue to hold the neck in place, I found this one enjoyable to fold. There is a violin bow designed by Paulius Mielinis which complements this Violin. However, I am not aware if the diagrams or crease pattern have been published for it.
The most amazing part of this model is the attention to detail. It has everything from the scroll, peg box and pegs to the f-holes on the body of the instrument. I am amazed with the level of thought which has been put into designing this model by Gen Hagiwara – it is truly mind blowing. While a major portion of the folding sequence, in the beginning, is the pre-creasing to fold the basic Violin shape, the folding sequence quickly transitions to shaping the model to make it aesthetically realistic. The part which requires a lot of patience and dexterity is the neck of the violin, which includes the peg box and pegs. This portion took the longest time for me to fold. To make the scroll at the end of the neck, I used a bit of water to wet and then roll in. I have clicked a few pictures from different angles hoping to capture the complexity and beauty of this design.
The diagrams to this design can be found in Origami Tanteidan Magazine #143 (which you can back order from Japan Origami Academic Society at the time of writing this post) and you can also check out JM Origami tutorial for this. I used double tissue paper to fold this Violin – a single sheet each of brown and black tissue paper stuck together using MC. I then cut the prepared paper to the 1:4 ratio which is needed to start folding. To shape the violin, I used clips to hold the curves and folds in place and kept it overnight to set. The paper I used was Darice 100-Piece Premium Quality Tissue Gift Wrapping Paper and I used Lineco Methyl Cellulose Adhesive to prepare the double tissue paper.
This year I celebrate my first mother’s day being a new mom and for it, I received a load of flowers from my daughter 🙂
I have been thinking for quite a while on what model to fold to mark this occasion and I finally settled on Andrey Lukyanov’s You are always in my heart. This is a great little design to fold and the two-toned color hearts makes it look very nice. This model has a quick folding sequence and if one is crisp in making their folds, they’ll be rewarded with a perfect little double heart model.
I used Japanese Washi Paper to fold this design and I wanted the plain color side as the smaller heart, specifically. I thought the transition from a single shade of color to a heart of vibrant colors would signify a heart bursting of love. The size of the paper I used was 4 inches and there is no requirement for a fine or thin sheet of paper to fold this model. Kami or regular origami paper works best and you can play around with the color combinations. The size of the finished model is approz 2 inches.
How to fold this model:
Mariano Zavala has created a clear and concise tutorial on Andrey Lukyanov’s You are always in my heart. He has explained the steps really well and I found this tutorial very easy to follow.
I found this to be a challenging model to fold given the multiple delicate pre-creases. For this model, taken from Satoshi Kamiya’s first book of origami diagrams – Works of Satoshi KAMIYA. I used 2 sheets of tissue paper, which I stuck together using methyl cellulose.
This was the first time I prepared paper using MC and I was quite happy with the outcome. I used a 3 inch brush to apply the MC paste across the tissue paper and kept the papers to dry for a couple of days before I started folding this model. The paper is still thin and delicate, which made the initial pre-creasing a bit difficult for me. However, given the multiple layers involved in this design, especially for the limbs and the ‘pleats’ on the boar’s back, I would still recommend a thin paper. Once you prepare the MC mixture, if you have any remaining after preparing your double tissue paper, you can store it for your next use.
This is my first fold of this model and it took me about 2 weeks to complete it since I work on it only at nights for a few hours. I wanted to try preparing my own paper for complex models and folding Satoshi Kamiya’s Divine boar gave me the opportunity to test it with intricate folds. I liked the outcome of my first fold and enjoyed folding this design. The paper I used was Darice 100-Piece Premium Quality Tissue Gift Wrapping Paper and I used Lineco Methyl Cellulose Adhesive to paste two of these tissue papers together. The size of the paper I used was a square sheet measuring 20 inches. The size of the finished model is approximately 5 inches by 8 inches.
Instructions to prepare double tissue paper:
Sara Adams of HappyFolding has created a detailed video on preparing double tissue paper. I found this easy to follow and clear with instructions.
How to Fold Satoshi Kamiya’s Divine Boar:
The diagrams to this model can be found in Works of Satoshi KAMIYA. Mariano Zavala has created a fantastic instructional video for this model, too. I have used it as a reference for some of the tricky folds for this model and found it to be very helpful. He has painstakingly explained the intricate folds and is very clear in showing the steps. It is a 2 part instructional video which you can find on his YouTube channel.
This is yet another model I folded this weekend. It is from the book – Origami Butterflies – which has a lot of different types of butterfly variants; the best part about this book is that there is a section devoted to designing your own butterflies based on the elements / proportions of various folds. The overall folding sequence remains about the same though, irrespective of the little changes you might make. With the right kind of paper, whether duo-colored or single-side colored, one can come up with a multitude of combinations which will make for a very pretty wall decoration or gift.
Paper to use:
I used a 6 inch square sheet of single-side colored kami paper to fold this model. You can also use your own kind of paper, provided it is not too thick as the center or body of the butterfly will become too thick to fold.
How to fold this model:
The diagrams to this model are in the book – Origami Butterflies or you can follow this very detailed video I found on youtube where the presenter has shown the details in folding this butterfly very nicely.
This is a simple mandala design I chose to fold this weekend. I wanted to make use of the kami paper I had purchased from Daiso a couple of years ago and thought this design would be a good choice for it.
I deliberately selected a larger sized paper for this mandala, instead of the usual smaller 3 inch sized paper – just to see how it would turn out. I am not disappointed at all with the outcome.
Paper to use:
Since this is an easy model to fold, you can use any kind of decorative paper of your choice, including wrapping paper. One point to note, however, is that the paper you select should be colored differently on both sides to take advantage of the color change in between. So, simple kami paper, which is white on one side or duo colored paper will work well. Usually, mandalas are folded using smaller paper measuring approximately 3 inches or so. But you can select a size of your choice.
How to fold Falk Brito’s Mandala Piratininga:
Falk Brito has published the diagrams to this pretty design on his blog and they are quite easy to follow. You can find them here.
Additionally, Mariela Recinos of Origami Maniacs has created and shared a nice tutorial, with the permission of Falk Brito, on the folding sequence of this model. You can take a look at it here: