Amazing Firecrackers (Design by Yami Yamauchi)

Completed Model
Completed Model

These pretty firecrackers are made from solid colored Origami papers. One can use any sized square sheets of origami paper, but you should remember that larger the size, the bigger the model and smaller the size, the more difficult to fold!

Origami Base:

The firecracker uses a “waterbomb” base with a little twist to it.

What you need:

You require 12 sheets of origami paper, preferably 6 different colors and therefore 2 of each.

Here’s the way to fold the model:

This video on YouTube by Sara Adams, provides very detailed steps and explanations as to how to go about folding this model.

A different pattern
A different pattern

Techinique:

One just requires a little patience in folding this intriguing model. This is especially when you come to connecting the 2 ends of the row of house shaped pieces you have. You have to be careful in folding the ends so as to not tear any piece.

However, you will find a few of the “connecting folds” opening up as you try and connect the 2 ends. Please tuck these folds in as you try and complete the model.

I have uploaded a couple of pics of the model I folded. Each of these are of a different view of the firecracker, after I turned it inside-out.

Electra! (Design by Dave Mitchell)

Electra (Design by Dave Mitchell)
Electra (Design by Dave Mitchell)

This imaginative kusudama, designed by Dave Mitchell, requires just paper and patience! One needs to use paper of a smaller size and I have seen that regular ‘Post It Note’ sizes are just perfect. One can use an array of colors to fold an Electra and ‘interlocking’ these to make a ‘globe’ is real easy too.

Origami base to start off:

It starts off with a simple ‘waterbomb’ base, and can make use of a single color of paper too.

What you need:

60 pieces or rather sheets of paper. I have used Post – its to create this model. These are square shaped of size approx 5 inches or so.

Here’s how you do it:

I have found this video on Youtube.com by Cabulete, which clearly depicts how to fold an Electra. In it, they have used a paper size of 5″ or so.

Putting it together / Technique:

Try to connect different colored units together to add ‘variety’ to the color in the model. One should remember that the design consists of a “star” shape, connected to a “triangle’ shape. This alternating pattern is to be followed throughout the design and comes in really handy when checking up on whether you are going the right way.

Enjoy folding!

Floral Kusudama

Floral Kusudama
Floral Kusudama

This ‘Kusudama’ is one of the most simple variety and is really very easy to make. However, once again, for those ‘die-hard’ Origamists who insist there should be no use of anything other than paper – Sad News! This model does require the use of glue in order to create the ‘flowers’ and the ‘globe’ in totality.

I have used a ribbon to add a nice lil touch to this model. The kusudama’s size can be enlarged by increasing the number of floral units you are making.

What you need:

60 sheets (small sized) of approx 5″, square shaped, of paper. Regular ‘Post-It’ Size would do, too.

A Piece of Ribbon (optional)

A glue stick to attach the petals

How to go about it:

In this particular model, I have used just 12 floral units of varying color. One needs to make each of these floral units seperately and then glue them together. Each floral unit is further made up of 5 individual ‘petals’.

Each of these petals need to be folded first, that is 5, for a sinlge floral unit. Hence, in reality u are making 60 ‘petals’ initially and then taking 5 at a time, from this lot, and making 1 floral unit.

I found this handy video on YouTube.com which I thought was pretty good to follow and fold the model.

Putting it all together:

For stringing the ribbon through, when you have glued the first 6 floral units, you should ‘thread’ the fine ribbon though the centre portion of the “middle” flower. Then you can proceed to glue together the rest. When you reach the point where you have to glue in place the “middle” flower for the bottom of the globe, thread the ribbon though the flower’s centre and pull it out from the other end. You can keep it longer at the base and curl the end. You can also attach multiple ribbon pieces to the base of the kusudama and then curl them.

I agree that this takes up sometime, and requires patience. But as you can see, the end result is quite something!

Kusudama – Medallion

Medallion Kusudama
Medallion Kusudama

This I think, is the most simple of all Kusudama designs and can be attempted by beginners too. There are many variants in this design, and all of them use the same base as a start.

In the model above, I cut out little circles from sheet of gold foil, the size of a dime and pasted them at the centre of each unit. This avoids the tips of the medallions from ‘poking out’ untidily.

One can also cut out square pieces of paper, of a contrasting color, and paste them over the centre of each medallion, but, diagonally, in order to give the model a little complicated design.

However, for those who firmly believe that Origami should only make use of Paper, and only paper, beware! This kusudama requires each of the medallions to be glued to each other and the centre circle, if chosen to be used, needs to be glued too.

The final model, if whether you choose to paste the medallion centres or not, looks pretty, nonetheless. I also think, that, there should be a way to ‘interlock’ the medallion units without having to use glue.

I have used 6 sheets of different colored paper and in this case, it is printed paper I have made use of. The design, I have picked up from the book – Origami

You might find this video by Syribia helpful in folding this model.

Tyrannosaurus Rex (T-Rex)(Design by John Montroll)

Tyrannosaurus Rex (Design by John Montroll)
Tyrannosaurus Rex (Design by John Montroll)

This is a Miniature T Rex I folded 2 days ago. I used a 6″ single-side colored origami paper in this case, though. Again, you need a ‘thin’ origami paper to fold this model due to the intricate multiple creases involved.

Another point worth noting in folding this model is that, it is best to use a paper which is colored on both sides.

The size of the folded dinosaur can be adjusted by using a larger or smaller sized paper. It must be square shaped though.

What I think though, is that if one can get an appropriately printed paper, such as a wrapping paper or even if you can get your hands on a specially printed origami paper, one can make a realistic looking T Rex. The ‘claws’ and the ‘snub nose’ which you see in this folded model are optional creases and can be done without. But, adding them, of course, gives a nice ‘look’ to the dinosaur.

This model is from the book – Animal Origami for the Enthusiast: Step-by-Step Instructions in Over 900 Diagrams/25 Original Models

One can also follow the instructions to fold this TRex, by following this video: